Tested boards
A board is tested when someone has run its smoke test on the real hardware and the board’s config has a record of the run. This page lists those records. It is written from them every time the docs build, so a board can’t appear here without one.
Any other board config still works to the extent its drivers do: it installs from the untested index, and moves to the main index once someone adds its record. Board configs lists every config, tested or not.
What a record says
The smoke test runs on the board. It checks that board_config imports, that
the display draws, that touch reads, and that each peripheral the config lists
answers: the factory builds one without raising. Roles that would take the
board away, such as sleep, are looked up but never called. A role the board
can’t exercise at the time, such as sdcard with no card in the slot, is
skipped, and the record names it under Left out.
A record keeps the hardware, the firmware the board reported, the date and
each check that passed. It is the file tested.json beside the board’s
manifest.py, written by tools/mark_tested.py. A record only says what ran
on the day it was made, on the firmware it names. “Passed” means every check
that ran answered, not that every feature of the board works.
The boards
ili9341_pico_uno
Hardware: Waveshare RP2040-Plus with Adafruit 2.8in cap-touch shield
Firmware: micropython 1.30.0 (Waveshare RP2040-Plus 4MB with RP2040), v1.30.0-preview.160.gb70ae1aca6 on 2026-11-05 (GNU 14.2.1 MinSizeRel)
Run on: 2026-11-17
Passed (3):
board_config imports,display draws,touch readsLeft out: nothing
seeed_gc9a01_on_xiao_nrf52840
Hardware: Seeed XIAO nRF52840 Sense with Seeed Round Display for XIAO; the display’s microSD slot is empty, so sdcard was skipped
Firmware: micropython 1.30.0 (XIAO nRF52840 Sense with NRF52840), v1.30.0-preview.160.gb70ae1aca6 on 2026-11-16
Run on: 2026-11-17
Passed (5):
board_config imports,display draws,touch reads,battery answers,rtc answersLeft out:
sdcardConfig:
board_configs/busdisplay/spi/seeed_gc9a01_on_xiao_nrf52840
t-watch-s3
Hardware: LILYGO T-Watch S3 (ESP32-S3, 16 MB flash, 8 MB PSRAM)
Firmware: micropython 1.30.0 (Generic ESP32S3 module with Octal-SPIRAM with ESP32-S3), v1.30.0-preview.161.g2d7003333b.dirty on 2026-10-20
Run on: 2026-10-21
Passed (16):
board_config imports,display draws,touch reads,accelerometer answers,audio_out answers,audio_power answers,battery answers,ble answers,boot_button answers,haptic answers,ir answers,lora answers,pcm_in answers,pcm_out answers,rtc answers,wlan answersLeft out:
sleep
desktop
Hardware: Linux x86-64 (WSL2 with WSLg), unix MicroPython, an SDL window
Firmware: micropython 1.30.0 (linux [GCC 13.3.0] version)
Run on: 2026-10-20
Passed (5):
board_config imports,display draws,audio_out answers,pcm_in answers,pcm_out answersLeft out: nothing
Config:
board_configs/desktop
esp32-p4-wifi6-dev-kit_kedei-5in-dsi
Hardware: Waveshare ESP32-P4-WIFI6-DEV-KIT with a KeDei 5-inch DSI display
Firmware: micropython 1.30.0 (Waveshare ESP32-P4-WIFI6-DEV-KIT, USB device on H2 with ESP32-P4), v1.30.0-preview.161.g52813b3bb4.dirty on 2026-10-20
Run on: 2026-10-20
Passed (15):
board_config imports,display draws,touch reads,audio_out answers,audio_power answers,ble answers,boot_button answers,camera answers,ethernet answers,i2c answers,pcm_in answers,pcm_out answers,radio answers,sdcard answers,wlan answersLeft out:
usb_deviceConfig:
board_configs/fbdisplay/esp32-p4-wifi6-dev-kit_kedei-5in-dsi
esp32-p4-wifi6-touch-lcd-4b
Hardware: Waveshare ESP32-P4-WIFI6-Touch-LCD-4B; microSD (SDIO) mounted and listed
Firmware: micropython 1.30.0 (Generic ESP32P4 module with pre revision 3 chip and ESP32C6 hosted WIFI with ESP32-P4), v1.30.0-preview.161.g2d7003333b.dirty on 2026-10-20
Run on: 2026-10-20
Passed (14):
board_config imports,display draws,touch reads,audio_in_power answers,audio_out answers,audio_power answers,ble answers,boot_button answers,camera answers,pcm_in answers,pcm_out answers,radio answers,sdcard answers,wlan answersLeft out:
usb_device
esp32-s3-touch-lcd-4_3
Hardware: Waveshare ESP32-S3-Touch-LCD-4.3; no microSD card fitted, so sdcard was skipped
Firmware: micropython 1.30.0 (Generic ESP32S3 module with Octal-SPIRAM with ESP32-S3), v1.30.0-preview.161.gdd762237ed.dirty on 2026-10-19
Run on: 2026-10-20
Passed (6):
board_config imports,display draws,touch reads,ble answers,rs485 answers,wlan answersLeft out:
can,sdcard,usb_device
esp32-s3-touch-lcd-7
Hardware: Waveshare ESP32-S3-Touch-LCD-7 (800x480); no card answered in its microSD slot, so sdcard was skipped
Firmware: micropython 1.30.0 (Generic ESP32S3 module with Octal-SPIRAM with ESP32-S3), 2818d7fb1d-dirty on 2026-10-20
Run on: 2026-10-20
Passed (6):
board_config imports,display draws,touch reads,ble answers,rs485 answers,wlan answersLeft out:
can,sdcard,usb_device
8 boards have a record. 74 more board configs have none yet.
Install one
A tested board’s config is on the main index:
import mip
mip.install("esp32-s3-touch-lcd-4_3", index="https://lib.omnipython.org")
A board with no record yet is on the untested index, which also carries what it depends on:
import mip
mip.install("pico-lcd-1.8", index="https://lib.omnipython.org/untested")
A config a tested board requires comes with it on the main index.
Get a board on this list
Install its package from the untested index, run tools/mark_tested.py from a
checkout of omnipython against the
board, and open a pull request with the tested.json it writes. Nothing is
written if a check fails. The steps are in
CONTRIBUTING.